TB-32 Suggested Mounting Systems for Ceiling hung toilet partitions
Provisions must be in the construction of the building to support ceiling-hung toilet partitions. Structure in ceiling, not furnished by Bobrick, must support at least 200 lb per laminated-plastic par |
TB-46 Suggested Mounting Systems for Floor-Anchored and Overhead Braced Toilet Partitions
LEVELING DEVICE The steel-core reinforced stiles of Bobrick floor-anchored and overhead-braced toilet partitions are constructed with an 11-gauge steel core welded to a 3/8'' thick leveling bar. Each |
TB-49 CONCEALED ANCHOR PLATES FOR STUD WALL CONSTRUCTION
Bobrick anchor plates are designed for secure installation of all Bobrick grab bars specified for stud wall construction. The hole pattern(s) will accommodate all the mounting screw configurations fou |
TB-34 Threaded Metal Inserts Reinforce Door & Stile hardware in all Bobrick Partitions
Bobrick's standard partitions have superior holding power built in, using Commercial Hardware in an unique nohardware- on-the-outside styling. In doors and stiles with particle board core (TrimLine, D |
TB-55 Locating Accessories inside the Toilet Partition
PARTITION-MOUNTED ACCESSORIES Accessories in a toilet partition should be positioned to be within easy reach from the toilet. All accessories should be accessible on a side wall or partition. Bob |
TB-79 SCRATCH RESISTANCE OF VARIOUS TOILET PARTITION MATERIALS
INDEPENDENT LABORATORY TESTING Three samples of six different partition materials [Powder-Coated Metal (Metal), High Density Polyethylene (HDPE), Polypropylene (Polyprop), Plastic Laminate (P-Lam), So |
Tb-44 CAPACITIES OF BOBRICK FOLDED PAPER TOWEL DISPENSERS
CAPACITIES OF BOBRICK FOLDED PAPER TOWEL DISPENSERS A top-quality, two-ply towel, heavily creped and embossed, will yield relatively few towels to the cabinet inch; a hard finished, single-ply towel |
CSI Specification Guidelines Section 15400
Specifier notes are shown in italics and should be deleted from
the final document. Generally all of the manufacturers products in
this category are listed and the specifier must take care to dele |
Bradley Lenox Locker Installation Instructions
Lenox Locker Installation instructions
Step 1: Optional Locker Base Installation
IMPORTANT: Make sure the base is square AND level before anchoring to the floor (the
base may be square but not |
Bradley Panelon Modular Shower System Technical Data
Bradley Panelon Showers Prefabricated Modular Shower Systems
Specifications
Materials
Panelon showers constructed of type 304 stainless steel. Shower panels and stanchions are 16 gau |
Bradley Column beach Shower COL-6C
Column Showers 6-Person
COL-6C
Specifications
Materials
All exposed parts are type 304 stainless steel or polished chrome-plated brass. Valve manifold is cast brass. Drain fitting is c |
Bradley Column beach Shower COL-5C-HN, COL-4C-HN, COL-3C-HN, COL-2C-HN
Barrier-Free Column Showers 2- to 6-Person
COL-2C-HN, COL-3C-HN, COL-4C-HN, COL-5C-HN, COL-6C-HN
Specifications
Construction
Materials
All exposed parts are type 304 stainless steel |
Bradley WS-1k-HN Individual Pivoting Wall Shower
Corner- Mounted Barrier-Free Wall Shower
WS-1K-HN
Completely Preassembled Corner-Mounted Shower
Unit
Ideal for Barrier-Free Shower Rooms
Specifications
Barrier-Free Seat Loca |
Bradley Adapt-A-Brad Conversion Specs
Adapt-A-Brad Individual Renovation Shower
WS-1WAB
Converts Existing In-Wall Hot and Cold Compression Valves to Pressure-Balancing or Mechanical Metering Control
Comes Complete with Su |
Bradley Economy Wall Shower, WS-2W, WS-3W
SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 12pt; FONT-FAMILY: Arial">
Econo-Wall Showers
WS-2W, WS-3W
Completely Preassembled Shower Unit
Hydrostatically Tested to 150 PSI
Ready fo |
Bradley WS-2W-HN, WS-3W-HN Econo-Wall Showers
Barrier-Free Econo-Wall Shower
WS-2W-HN, WS-3W-HN
Completely Preassembled Shower Unit
Ideal for Barrier-Free Shower Rooms
Specifications
Barrier-Free |
Bradley WS-2WMD Dual Station Wall saver Shower (Multi Stall ) Stainless Steel,Bradley WS-3WMT Three Station Wall Saver Shower
Wall-Saver Showers
WS-2WMD, WS-3WMT
Wide Housing Multi-Station Shower
Completely Preassembled
Ready for Connection to Plumbing Supplies
Specifications
Materials
Shower p |
Bradley WS-2WMD Dual Station Wall saver Shower (Multi Stall ) Stainless Steel,Bradley WS-3WMT Three Station Wall Saver Shower installation instructi
Installation Instructions
Step 1: Install shower
NOTE: Flush supply lines before making connections.
1. Rough-in supply piping to your shower as shown in Figure 1.
NOTE: Use the cold inlet locat |
Modesty Module Showers Models 4000 thru 4036 & Model 4044
Modesty Module Showers
Models 4000 thru 4036 & Model 4044
(IMPORTANT: Signed approvals are required prior to fabrication.)
Unit Complete with Curtain and Necessary Hardware |
Modesty Module Showers Models 4000 thru 4036 & Model 4044
Installation Instructions
Step 1: Install floor anchors
1. Install your Bradley shower as instructed on the shower installation instructions provided with your new shower.
2. Check dimensions on |