|
|
|
Bradley Column beach Shower COL-6C Last Updated: 03/24/2008 |
||
|
Column Showers 6-Person COL-6C Specifications Materials All exposed parts are type 304 stainless steel or polished chrome-plated brass. Valve manifold is cast brass. Drain fitting is cast iron and supply inlets are copper tubing. Standard Equipment Flow Control A 2.0 GPM flow control is standard. (Actual flow may vary, but will not exceed 2.5 GPM Max.) Column Shower Constructed of type 304 stainless steel. Column and column cap are 16 gauge, and base flange is 13 gauge. Access panel located near bottom of column. Each station on column shower equipped with a stainless steel soap tray. Drain Fitting Cast iron with five stainless steel mounting bolts. Supply Inlets Constructed of 3/4" type “L” copper tubing. Optional Privacy Compartments Partitions Fabricated of 20 gauge 300 series stainless steel sheets polished to a #4 finish. Sandwich type construction with waterproof cores securely bonded between sheets. Partitions are secured to posts with 14 gauge type 300 stainless steel stirrups and stainless steel screws. Posts Fabricated 18 gauge 1-1/4" square x 80" stainless steel tubing. Post is secured to floor with an expansion anchor and a concealed foot angle which allows plus or minus 1/2" vertical adjustment. Curtains Curtain rails fabricated of 300 series #4 finish stainless steel cylindrical tubing. Curtain hooks are steel wire with a zinc chromate finish. Curtains are 60" W x 74" H and fabricated of heavy gauge translucent vinyl with hemmed edges and aluminum grommet reinforced eyelets. Hardware All exposed fasteners are vandal-proof stainless steel. Post shoes are anodized aluminum and finished to match stainless steel.
|