TB-49 CONCEALED ANCHOR PLATES FOR STUD WALL CONSTRUCTION
Bobrick anchor plates are designed for secure installation of all Bobrick grab bars specified for stud wall construction. The hole pattern(s) will accommodate all the mounting screw configurations fou |
TB-46 Suggested Mounting Systems for Floor-Anchored and Overhead Braced Toilet Partitions
LEVELING DEVICE The steel-core reinforced stiles of Bobrick floor-anchored and overhead-braced toilet partitions are constructed with an 11-gauge steel core welded to a 3/8'' thick leveling bar. Each |
TB-32 Suggested Mounting Systems for Ceiling hung toilet partitions
Provisions must be in the construction of the building to support ceiling-hung toilet partitions. Structure in ceiling, not furnished by Bobrick, must support at least 200 lb per laminated-plastic par |
CSI Specification Guidelines Section 15400
Specifier notes are shown in italics and should be deleted from
the final document. Generally all of the manufacturer’s products in
this category are listed and the specifier must take care to dele |
Bradley Lenox Locker Installation Instructions
Lenox Locker Installation instructions
Step 1: Optional Locker Base Installation
IMPORTANT: Make sure the base is square AND level before anchoring to the floor (the
base may be square but not |
Lenox Pedestal bench Technical Data
Construction - Standard Features
Bench Top
Constructed of 1-1/2" thick High Density Polyethylene (HDPE) with
homogeneous color and a matte fi nish texture.
Pedestal
17" Black anodiz |
Bradley Lenox Cubby Locker Technical data
Bradley Lenox Cubby Lockers
• Tough, attractive, solid plastic never needs painting, resists dents and scratches
• Impervious to moisture — cubby will not rust or delaminate
• D |
Bradley Panelon Modular Shower System Technical Data
Bradley Panelon Showers — Prefabricated Modular Shower Systems
Specifications
Materials
Panelon showers constructed of type 304 stainless steel. Shower panels and stanchions are 16 gau |
Bradley Column beach Shower COL-6C
Column Showers 6-Person
COL-6C
Specifications
Materials
All exposed parts are type 304 stainless steel or polished chrome-plated brass. Valve manifold is cast brass. Drain fitting is c |
Bradley Economy Wall Shower, WS-2W, WS-3W
SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 12pt; FONT-FAMILY: Arial">
Econo-Wall Showers
WS-2W, WS-3W
• Completely Preassembled Shower Unit
• Hydrostatically Tested to 150 PSI
• Ready fo |
Bradley WS-2WMD Dual Station Wall saver Shower (Multi Stall ) Stainless Steel,Bradley WS-3WMT Three Station Wall Saver Shower installation instructi
Installation Instructions
Step 1: Install shower
NOTE: Flush supply lines before making connections.
1. Rough-in supply piping to your shower as shown in Figure 1.
NOTE: Use the cold inlet locat |
Modesty Module Showers Models 4000 thru 4036 & Model 4044
Modesty Module Showers
Models 4000 thru 4036 & Model 4044
(IMPORTANT: Signed approvals are required prior to fabrication.)
• Unit Complete with Curtain and Necessary Hardware |
Modesty Module Showers Models 4000 thru 4036 & Model 4044
Installation Instructions
Step 1: Install floor anchors
1. Install your Bradley shower as instructed on the shower installation instructions provided with your new shower.
2. Check dimensions on |
Bradley Column beach Shower COL-5C, COL-4C, COL-3C, COL-2C
Column Showers 2- to 5-Person
COL-5C, COL-4C, COL-3C, COL-2C
• One Set of Supply Connections Required for Five Stations
• Preassembled, Complete with Drain Fitting
Specifications
Ma |
Installation Instructions for Bradley 1W (Bradsole), 2W, 3W, 1K
& 1F Econo-Wall™ Showers
Installation Instructions for Bradley 1W (Bradsole), 2W, 3W, 1K
& 1F Econo-Wall™ Showers
Supplies required for installation:
• Water supply inlets for 1/2" type “L” copper tube for 1K and 1W show |