BARRIER-FREE WASHROOM PLANNING GUIDE
THE ADA AND UNIVERSAL DESIGN The ADA Title III requires all new construction of public accommodations and commercial facilities meet or exceed ADAAG specifications. All additions and substantial alte |
TB-14 CAPACITIES OF BOBRICK WASTE RECEPTACLES
CAPACITIES OF BOBRICK WASTE RECEPTACLES See attached Bulletin for Chart listing capacities of waste receptacles |
TB-15 THE COST OF PAPER TOWELS VS. HAND DRYERS
Bobrick Hand Dryers : 1) Bobrick Hand Dryers draw 2300 watts (2.3 kW) of electricity while operating and have a 30-second drying cycle. 2) 1 hour of operation = 30 seconds per drying cycle x 120 dryi |
TB-21 EFFECTIVE WAYS TO CLEAN STAINLESS STEEL
EFFECTIVE WAYS TO CLEAN STAINLESS STEEL See attached Bulletin for cleaning chart |
TB-25 NAPKIN AND TAMPON GUIDE FOR BOBRICK NAPKIN/TAMPON VENDORS
NAPKIN AND TAMPON GUIDE FOR BOBRICK NAPKIN/TAMPON VENDORS See attached Bulletin for chart of napkins and Tampons for Bobrick Units. |
TB-32 Suggested Mounting Systems for Ceiling hung toilet partitions
Provisions must be in the construction of the building to support ceiling-hung toilet partitions. Structure in ceiling, not furnished by Bobrick, must support at least 200 lb per laminated-plastic par |
TB-34 Threaded Metal Inserts Reinforce Door & Stile hardware in all Bobrick Partitions
Bobrick's standard partitions have superior holding power built in, using Commercial Hardware in an unique nohardware- on-the-outside styling. In doors and stiles with particle board core (TrimLine, D |
TB-37 Core material used in Bobrick toilet compartments
1030/1040 Series Particle-board is the substrate for most laminated plastic toilet partitions. It is fabricated of wood chips and flakes embedded in resins. The wood most commonly used in commercial p |
Tb-44 CAPACITIES OF BOBRICK FOLDED PAPER TOWEL DISPENSERS
CAPACITIES OF BOBRICK FOLDED PAPER TOWEL DISPENSERS A top-quality, two-ply towel, heavily creped and embossed, will yield relatively few towels to the cabinet inch; a hard finished, single-ply towel |
Tb-45 BOBRICK WASHROOM EQUIPMENT THAT CONFORM TO U.S. FEDERAL SPECIFICATIONS
The attached Bulletin lists Federal Specifications, Commercial Item Descriptions (CIDs), and the Bobrick Models that may be submitted in appropriate classifications. Selections from this guide should |
TB-46 Suggested Mounting Systems for Floor-Anchored and Overhead Braced Toilet Partitions
LEVELING DEVICE The steel-core reinforced stiles of Bobrick floor-anchored and overhead-braced toilet partitions are constructed with an 11-gauge steel core welded to a 3/8'' thick leveling bar. Each |
TB-49 CONCEALED ANCHOR PLATES FOR STUD WALL CONSTRUCTION
Bobrick anchor plates are designed for secure installation of all Bobrick grab bars specified for stud wall construction. The hole pattern(s) will accommodate all the mounting screw configurations fou |
TB-55 Locating Accessories inside the Toilet Partition
PARTITION-MOUNTED ACCESSORIES • Accessories in a toilet partition should be positioned to be within easy reach from the toilet. All accessories should be accessible on a side wall or partition. • Bob |
TB-60 Cleaning and Maintenance for Laminated Plastic and Solid Phenolic
Bobrick Toilet Partitions, Urinal Screens, and Dressing Compartments are constructed of three different types of material. The three different types of material are: Laminated Plastic, Solid Phenolic, |
TB-62 WHEELCHAIR MANEUVERABILITY DRAWING TEMPLATE
A DESIGNER'S AID FOR CHECKING BARRIER-FREE ROOM LAYOUTS Architects concerned with designing buildings that will be “accessible to and usable by the physically handicapped” will find the Bobrick “Wheel |
TB-63 CONCEALED TOWEL CABINET FACILITATES CODE COMPLIANCE
Bobrick Model B-318 paper towel dispenser provides a versatile element for the design professional. It permits construction or renovation of small spaces that still serve washroom users effectively an |
TB-73 SURFACE BURNING CHARACTERISTICS OF VARIOUS TOILET PARTITION MATERIALS
INDEPENDENT LABORATORY TESTING Samples of different toilet partition materials were sent to independent fire test laboratories for testing and evaluation to determine the relative surface burning cha |
TB-75 TYpes Of Stainless Steel
Stainless steel is a term covering more than fifty alloys of steel, all with chromium and additives to counteract the rusting of iron, the basic mineral in steel. Many of the stainless varieties are |
TB-76 EFFECTIVE WAYS TO CLEAN MATRIX™ SERIES PRODUCTS
Bobrick's Matrix™ Series products feature easy-to-clean impact- and corrosion-resistant high-gloss surfaces with molded-in color that can't peel or chip. Suggested cleaning methods for common soils a |
TB-77 Sierra Series LEED Certification Program
Sierra Series LEED Certification Program: Environmental sustainability in architectural design can help contain construction costs and/or reduce annual building operating expenses. The Solid Color Re |