 |
 |
 |
|
- ADA and TAS Compliant (Optional Trap Cover Required)
- Serves Two or Three Users at a Time with Same 48" Wide Bowl
- Sleek, Low-Profile Design, Only 38
" High
-
Constructed of Vandal-Resistant Terreon® Solid Surface Material
-
Available in 21 Colors
-
Battery or AC-Powered IR Control
Specifications
Size and Capacity
Accommodates up to two or three users at a time, using less water, energy and space than lavs equipped with conventional faucets. Each streamformer is equipped with a water conserving 0.5 GPM flow restrictor. Operating range is 20–80 PSI.
Integrated Bowl and Sprayhead
Constructed of Terreon®, a densified solid surface material composed of polyester resin. Terreon® is resistant to chemicals, stains, burns, and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.
Trap Cover
Optional trap cover is made from vacuum formed .187 gauge ABS plastic. It is resistant to stains, burns and impact; and will not chip, peel or flake. Choose Coal or Putty color.
Vandal Resistance
Top cover, streamformers and infrared sensors are secured from inside the fixture. All valves, water supplies and waste connections can be concealed inside the optional trap cover.
Standard Equipment
In addition to the Terreon® bowl and top access cover, the following valves and fittings are standard: stop/strainer/check valve; flexible stainless supply hose, drain spud and lock nut. Stops are 1/2" NPT female.
Code Compliance and Certifications
ANSI Standards
Terreon® is NAHB certified to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-1-2001.
UPC Approval
The Express® Lav Systems are Uniform Plumbing Code (UPC) approved through the International Association of Plumbing and Mechanical Officials (IAPMO).
ADA & TAS Compliant
The Crescent® is designed to comply with all ADA and TAS guidelines on reaches, clearances and operation when mounted at recommended height dimensions (To be fully ADA-compliant, exposed piping must be covered. Optional Bradley Trap Cover or pipe covering recommended). The low profile design of the Crescent® allows up to 2" for the frame of an ADA compliant mirror to be mounted above the fixture. Always check your local and state codes.
Activation Controls
Battery Infrared Sensor and Valve
Each battery-powered sensor uses a zone-focused infrared transmitting beam, creating a large detection area not exceeding the bowl perimeter. The sensor is not affected by varying skin tones or darkness. When hands enter the detection area, the sensor starts water flow by opening the valve electronically. When hands leave the detection area, the sensor stops the flow of water by closing the electronically-activated solenoid valve. The 6-volt DC, electronically-activated solenoid valve has few moving parts providing reliable operation that is unaffected by most chemicals and minerals often present in municipal water supplies. Each station is powered by a single lithium battery. Battery type is Duracell® DL 223A or equivalent (batteries included).
|
|
|
 |
|
 |
|
|
|