All exposed parts are type 304 stainless steel or polished chrome-plated brass. Drain fitting is cast iron and supply inlets are copper tubing. Internal manifold is cast brass. Grab bar is 18 gauge.

Constructed of type 304 stainless steel. Column and column cap are 16 gauge, and base flange is 14 gauge. Valve manifold is cast brass. Access panel located near bottom of column.Each station on column shower equipped with a stainless steel soap tray.

Showerhead

Standard fixed direction adjustable spray showerhead.

Diverter Valve

Lever handle operation for easy transfer of water flow between fixed and hand-held shower spray.

Hand-Held Shower Spray

Constructed with a 60" stainless steel flexible hose and post style mounting bracket to hold to column. Elevated in-line backflow preventer with quick-disconnect for flexible hose.

Supply Inlets

Constructed of 3/4" type “L” copper tubing.

Flow Control

A 2.0 GPM flow control is standard. (Actual flow may vary,but will not exceed 2.5 GPM max.)

Grab Bar

Grab bar fabricated of 18 gauge 1-1/2" O.D. stainless steel tubing with a 1-1/2" safety statute clearance. Flanges are 11 gauge. Load capacity in excess of 300 lbs. Vertically mounted on column.

Drain Fitting

Cast iron with five stainless steel mounting bolts.